Remi Elektrotechnik Limited
Remi Elektrotechnik Limited
Send Email
0804603498879% Response Rate
Search

Home » What We Offer » Remi Stability Chambers


Remi Stability Chambers

Pioneers in the industry, we offer remi sc-6 plus lcd stability chamber, remi sc-10 plus lcd stability chamber, remi sc-12 plus lcd stability chamber, remi sc-16 plus lcd stability chamber, remi sc-19 plus lcd stability chamber and remi sc-28 plus lcd stability chamber from India.

Remi SC-6 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-6 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3.54 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves2
Internal Volume200 Liters
Internal Dimensions (W x D x H)660 x 655 x 450 mm
External Dimensions (W x D x H)800 x 1095 x 1020 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-10 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-10 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3.78 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves3
Internal Volume280 Liters
Internal Dimensions (W x D x H)660 x 655 x 650 mm
External Dimensions (W x D x H)800 x 1095 x 1220 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-12 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-12 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3.94 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves4
Internal Volume370 Liters
Internal Dimensions (W x D x H)660 x 655 x 850 mm
External Dimensions (W x D x H)800 x 1095 x 1420 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-16 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-16 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.45 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves5
Internal Volume450 Liters
Internal Dimensions (W x D x H)660 x 655 x 1050 mm
External Dimensions (W x D x H)800 x 1095 x 1620 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-19 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-19 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.48 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves6
Internal Volume540 Liters
Internal Dimensions (W x D x H)660 x 655 x 1250 mm
External Dimensions (W x D x H)800 x 1095 x 1820 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-28 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-28 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6.31 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves6
Internal Volume800 Liters
Internal Dimensions (W x D x H)800 x 800 x 1250 mm
External Dimensions (W x D x H)960 x 1370 x 1950 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-07

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-35 Plus LCD Stability Chamber

REQUEST CALLBACK

Remi SC-35 Plus LCD Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6.66 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display4" LCD Screen, Large size Display for ease of reading
Number Of Shelves7
Internal Volume1000 Liters
Internal Dimensions (W x D x H)800 x 800 x 1580 mm
External Dimensions (W x D x H)960 x 1370 x 2270 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-07

LDC Display
  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
Yes! I am interested

Remi SC-6 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-6 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3.94 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves2
Internal Volume200 Liters
Internal Dimensions (W x D x H)660 x 655 x 450 mm
External Dimensions (W x D x H)800 x 1095 x 1020 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-10 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-10 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.13 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves3
Internal Volume280 Liters
Internal Dimensions (W x D x H)660 x 655 x 650 mm
External Dimensions (W x D x H)800 x 1095 x 1220 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-12 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-12 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.32 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves4
Internal Volume370 Liters
Internal Dimensions (W x D x H)660 x 655 x 850 mm
External Dimensions (W x D x H)800 x 1095 x 1420 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-16 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-16 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.84 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves5
Internal Volume450 Liters
Internal Dimensions (W x D x H)660 x 655 x 1050 mm
External Dimensions (W x D x H)800 x 1095 x 1620 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-19 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-19 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4.91 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves6
Internal Volume540 Liters
Internal Dimensions (W x D x H)660 x 655 x 1250 mm
External Dimensions (W x D x H)800 x 1095 x 1820 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-04

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-28 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-28 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6.73 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves6
Internal Volume800 Liters
Internal Dimensions (W x D x H)800 x 800 x 1250 mm
External Dimensions (W x D x H)960 x 1370 x 1950 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-07

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

Remi SC-35 Plus TFT Stability Chamber

REQUEST CALLBACK

Remi SC-35 Plus TFT Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 7.08 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Display7 inch big colour touch screen
Number Of Shelves7
Internal Volume1000 Liters
Internal Dimensions (W x D x H)800 x 800 x 1580 mm
External Dimensions (W x D x H)960 x 1370 x 2270 mm
Temperature Range & Accuracy10 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3%
Temperature & Humidity controlMicroprocessor with Capacitance type sensor
Power Failure AlarmVisual Alarm
Illumination8 Watts Fluorescent Tube
Internal Body MaterialStainless Steel - 316 grade
External Body MaterialStainless Steel - 304 grade
Insulation80 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
Noise LevelLess Than 65 db(A)
Supply220-240 Volts, 50 Hz Single Phase.
Recommended Voltage StabilizerVS-07

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

  • Fulfills storage conditions of 25°C – 60% RH, 40°C – 75% M RH, 30°C – 65% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled CFC free PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI “Datasoft” data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS – 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Weight carrying capacity of each tray : 30 Kg Uniformly distributed
  • Smart Handle with LED door Closure indication

Touch Screen Display
  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 1500 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions
  • Remi “Datasoft” Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)
Yes! I am interested

REMI SC-6 Plus Stability Chambers

REQUEST CALLBACK

REMI SC-6 Plus Stability Chambers
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2.98 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
CFC FreeYes
BrandRemi
MaterialStainless Steel
Internal Volume (Ltrs)200
Number of Tray2
Internal Dimensions (WDH)660*655*450 mm
External Dimensions (WDH)800*1095*1020 mm
Power Failure AlarmVisual Alarm
Internal Body MaterialStainless steel - 316 grade
External Body MaterialStainless steel - 304 grade

The REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements. These freezers are available in standard & GMP versions.
Salient Features:
Designed as per ICH guidelines to meet, WHO and USFDA requirementFulfills storage conditions of 25C – 60% Rh, 40C-75% Rh, 30C–65% Rh, 25C–40% RhPrecise monitoring of temperature and humidity conditionsUnique design of thermal barrier for better energy efficiency.Machine filled CFC free PUF insulation to eliminate void pocketsPowerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit heating by long life SS tubular heatersChamber calibration port on side Adjustable traysOutput for remote alarm.
Leading Technology:
Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity4 Inch attractive LCD display for direct display of humidity & temperatureBattery Backup for ControllerSettable High/low alarm pointsPower failure and resumption recorded with date and time.PC Communication through RS-485 with data acquisition softwareMachine filled PUF insulation to eliminate void pocketsHistogram format of 24 hours temperature and humidity recordingSettable High/low alarm points with date and timeMemory for storage of up to 1000 recordsCentronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print intervalChamber calibration port on sideAdjustable traysData logger for 8 Point (4 4) temperature/humidity recording with sensor, printer interface and software Low water level alarm and power cutoff of boiler tank heaterHigh temperature safety cut off & alarms for high/low set parametersElectrical circuit breakerTime delay for compressor switch onOverload cut off relay for compressorWeight carrying capacity of each tray : 30 kg uniformly distributedSmart Handle with LED door closure indication.
Price Range : 2,21,000 to 4,42,000 INR/unit
Yes! I am interested

Remi WSC-50 Walk In Stability Chamber

REQUEST CALLBACK

Remi WSC-50 Walk In Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 8.97 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Internal Volume5000 Liters
Number of Shelves16
Internal Dimension (W x D x H)1250 x 2000 x 2000 mm
External Dimension (W x D x H)1410 x 2950 x 2160 mm
SensorCapcitance type direct reading sensor
Temperature Range & Accuracy20 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3% RH
Internal Body MaterialStainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body MaterialPowder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation80 mm minimum, CFC free polyurethane foam
IlluminationFluorescent Tubes
Control & DisplayMicroprocessor based PID control system with large 4" LCD Display
Power Failure AlarmAudio Visual Alarm
Door Open AlarmAudio Alarm in case door open for over one minute
Electrical220-240 volts, 50Hz, Single Phase
Audio Visual Variation AlarmSet Humidity +- 3% RH, Set Temperature +- 2 Degree C

REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI ‘Datasoft' software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.


Construction
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316 Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays.

Advantages:
  • Intelligent PLC/PID control system helps maintain highly accurate set parameters
  • Biometrics system for secured door access
  • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  • Chamber illumination by fluorescent tubes
  • PUF Insulation 80 mm for maximum thermal protection
  • Spring Door Latch for door closure
  • Blower Motor for forced air circulation
  • Control panel with Data-logger, PC connectivity and electrical components
  • Standby refrigeration by Compressor-1 and Compressor-2
  • Standby humidity by Heater-1 and Heater-2
  • Emergency bell switch to open the door from inside
  • Highly ergonomic handle with unique multi lever key lock
  • SS Racks and Trays

Preformance Characteristics:
  • Tailor made sizes as per available space.
  • Microprocessor controlled refrigeration system & heaters provide temperature accuracy and reproducible results.
  • Temperature range 20 °C to 60 °C, Accuracy ± 1???C.
  • Humidity range 40 % to 95 % RH,Accuracy ± 2% RH.
  • User friendly LCD screen
  • Easy-to-read large display.
  • Integrated Data logger for large data storage.
  • Variety of options for the graphic display of process parameters & utilities.
  • Real time clock for proper data management.
  • Electronically controlled humidification system with capacitance type humidity sensors.
  • Suitable for stability studies according to ICH guidelines.
  • Sealed Toughened glass view window on door felicitates sample viewing.
  • Temperature, Humidity and utility failures visual and audible alarms.
  • Remi "DATASOFT" data monitoring software as per FDA guideline of 21 CFR Part 11.
  • Stainless steel racks and trays.
  • IQ OQ PQ DQ documentation.
Yes! I am interested

Remi WSC-80 Walk In Stability Chamber

REQUEST CALLBACK

Remi WSC-80 Walk In Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10.71 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Number Of Shelves24
Internal Volume8000 Liters
Internal Dimension (W x D x H)2000 x 2000 x 2000 mm
External Dimension (W x D x H)2160 x 2950 x 2160 mm
SensorCapcitance type direct reading sensor
Temperature Range & Accuracy20 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3% RH
Audio Visual Variation AlarmSet Humidity +- 3% RH, Set Temperature +- 2 Degree C
Internal Body MaterialStainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body MaterialPowder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation80 mm minimum, CFC free polyurethane foam
IlluminationFluorescent Tubes
Control & DisplayMicroprocessor based PID control system with large 4" LCD Display
Power Failure AlarmAudio Visual Alarm
Door Open AlarmAudio Alarm in case door open for over one minute
Electrical220-240 volts, 50Hz, Single Phase

REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI ‘Datasoft' software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.


Construction
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316 Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays.

Advantages:
  • Intelligent PLC/PID control system helps maintain highly accurate set parameters
  • Biometrics system for secured door access
  • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  • Chamber illumination by fluorescent tubes
  • PUF Insulation 80 mm for maximum thermal protection
  • Spring Door Latch for door closure
  • Blower Motor for forced air circulation
  • Control panel with Data-logger, PC connectivity and electrical components
  • Standby refrigeration by Compressor-1 and Compressor-2
  • Standby humidity by Heater-1 and Heater-2
  • Emergency bell switch to open the door from inside
  • Highly ergonomic handle with unique multi lever key lock
  • SS Racks and Trays

Preformance Characteristics:
  • Tailor made sizes as per available space.
  • Microprocessor controlled refrigeration system & heaters provide temperature accuracy and reproducible results.
  • Temperature range 20 °C to 60 °C, Accuracy ± 1???C.
  • Humidity range 40 % to 95 % RH,Accuracy ± 2% RH.
  • User friendly LCD screen
  • Easy-to-read large display.
  • Integrated Data logger for large data storage.
  • Variety of options for the graphic display of process parameters & utilities.
  • Real time clock for proper data management.
  • Electronically controlled humidification system with capacitance type humidity sensors.
  • Suitable for stability studies according to ICH guidelines.
  • Sealed Toughened glass view window on door felicitates sample viewing.
  • Temperature, Humidity and utility failures visual and audible alarms.
  • Remi "DATASOFT" data monitoring software as per FDA guideline of 21 CFR Part 11.
  • Stainless steel racks and trays.
  • IQ OQ PQ DQ documentation.
Yes! I am interested

Remi WSC-100 Walk In Stability Chamber

REQUEST CALLBACK

Remi WSC-100 Walk In Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 12.34 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Internal Volume10000 Liters
Number Of Shelves32
Internal Dimension (W x D x H)2000 x 2000 x 2500 mm
External Dimension (W x D x H)2160 x 2950 x 2660 mm
SensorCapcitance type direct reading sensor
Temperature Range & Accuracy20 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3% RH
Audio Visual Variation AlarmSet Humidity +- 3% RH, Set Temperature +- 2 Degree C
Internal Body MaterialStainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body MaterialPowder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation80 mm minimum, CFC free polyurethane foam
IlluminationFluorescent Tubes
Control & DisplayMicroprocessor based PID control system with large 4" LCD Display
Power Failure AlarmAudio Visual Alarm
Door Open AlarmAudio Alarm in case door open for over one minute
Electrical220-240 volts, 50Hz, Single Phase

REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI ‘Datasoft' software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.


Construction
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316 Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays.

Advantages:
  • Intelligent PLC/PID control system helps maintain highly accurate set parameters
  • Biometrics system for secured door access
  • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  • Chamber illumination by fluorescent tubes
  • PUF Insulation 80 mm for maximum thermal protection
  • Spring Door Latch for door closure
  • Blower Motor for forced air circulation
  • Control panel with Data-logger, PC connectivity and electrical components
  • Standby refrigeration by Compressor-1 and Compressor-2
  • Standby humidity by Heater-1 and Heater-2
  • Emergency bell switch to open the door from inside
  • Highly ergonomic handle with unique multi lever key lock
  • SS Racks and Trays

Preformance Characteristics:
  • Tailor made sizes as per available space.
  • Microprocessor controlled refrigeration system & heaters provide temperature accuracy and reproducible results.
  • Temperature range 20 °C to 60 °C, Accuracy ± 1???C.
  • Humidity range 40 % to 95 % RH,Accuracy ± 2% RH.
  • User friendly LCD screen
  • Easy-to-read large display.
  • Integrated Data logger for large data storage.
  • Variety of options for the graphic display of process parameters & utilities.
  • Real time clock for proper data management.
  • Electronically controlled humidification system with capacitance type humidity sensors.
  • Suitable for stability studies according to ICH guidelines.
  • Sealed Toughened glass view window on door felicitates sample viewing.
  • Temperature, Humidity and utility failures visual and audible alarms.
  • Remi "DATASOFT" data monitoring software as per FDA guideline of 21 CFR Part 11.
  • Stainless steel racks and trays.
  • IQ OQ PQ DQ documentation.
Yes! I am interested

Remi WSC-120 Walk In Stability Chamber

REQUEST CALLBACK

Remi WSC-120 Walk In Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 14.16 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Internal Volume12500 Liters
Number Of Shelves48
Internal Dimension (W x D x H)2000 x 2500 x 2400 mm
External Dimension (W x D x H)2160 x 3450 x 2560 mm
SensorCapcitance type direct reading sensor
Temperature Range & Accuracy20 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3% RH
Audio Visual Variation AlarmSet Humidity +- 3% RH, Set Temperature +- 2 Degree C
Internal Body MaterialStainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body MaterialPowder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation80 mm minimum, CFC free polyurethane foam
IlluminationFluorescent Tubes
Control & DisplayMicroprocessor based PID control system with large 4" LCD Display
Power Failure AlarmAudio Visual Alarm
Door Open AlarmAudio Alarm in case door open for over one minute
Electrical220-240 volts, 50Hz, Single Phase

REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI ‘Datasoft' software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.


Construction
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316 Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays.

Advantages:
  • Intelligent PLC/PID control system helps maintain highly accurate set parameters
  • Biometrics system for secured door access
  • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  • Chamber illumination by fluorescent tubes
  • PUF Insulation 80 mm for maximum thermal protection
  • Spring Door Latch for door closure
  • Blower Motor for forced air circulation
  • Control panel with Data-logger, PC connectivity and electrical components
  • Standby refrigeration by Compressor-1 and Compressor-2
  • Standby humidity by Heater-1 and Heater-2
  • Emergency bell switch to open the door from inside
  • Highly ergonomic handle with unique multi lever key lock
  • SS Racks and Trays

Preformance Characteristics:
  • Tailor made sizes as per available space.
  • Microprocessor controlled refrigeration system & heaters provide temperature accuracy and reproducible results.
  • Temperature range 20 °C to 60 °C, Accuracy ± 1???C.
  • Humidity range 40 % to 95 % RH,Accuracy ± 2% RH.
  • User friendly LCD screen
  • Easy-to-read large display.
  • Integrated Data logger for large data storage.
  • Variety of options for the graphic display of process parameters & utilities.
  • Real time clock for proper data management.
  • Electronically controlled humidification system with capacitance type humidity sensors.
  • Suitable for stability studies according to ICH guidelines.
  • Sealed Toughened glass view window on door felicitates sample viewing.
  • Temperature, Humidity and utility failures visual and audible alarms.
  • Remi "DATASOFT" data monitoring software as per FDA guideline of 21 CFR Part 11.
  • Stainless steel racks and trays.
  • IQ OQ PQ DQ documentation.
Yes! I am interested

Remi WSC-150 Walk In Stability Chamber

REQUEST CALLBACK

Remi WSC-150 Walk In Stability Chamber
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15.75 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Internal Volume15000 Liters
Number Of Shelves48
Internal Dimension (W x D x H)2500 x 2500 x 2400 mm
External Dimension (W x D x H)2660 x 3450 x 2560 mm
SensorCapcitance type direct reading sensor
Temperature Range & Accuracy20 Degree C to 60 Degree C, +- 1 Degree C
Humidity Range (Rh) & Accuracy40% to 95%, +- 3% RH
Audio Visual Variation AlarmSet Humidity +- 3% RH, Set Temperature +- 2 Degree C
Internal Body MaterialStainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)
External Body MaterialPowder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)
Insulation80 mm minimum, CFC free polyurethane foam
IlluminationFluorescent Tubes
Control & DisplayMicroprocessor based PID control system with large 4" LCD Display
Power Failure AlarmAudio Visual Alarm
Door Open AlarmAudio Alarm in case door open for over one minute
Electrical220-240 volts, 50Hz, Single Phase

REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI ‘Datasoft' software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.


Construction
  • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
  • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
  • GMP model with inner (316 Grade) and outer of Stainless Steel (304 Grade)
  • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
  • Heating by long lasting SS tubular heaters
  • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
  • Forced Air Circulation by heavy duty motor
  • SS racks and trays.

Advantages:
  • Intelligent PLC/PID control system helps maintain highly accurate set parameters
  • Biometrics system for secured door access
  • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
  • Chamber illumination by fluorescent tubes
  • PUF Insulation 80 mm for maximum thermal protection
  • Spring Door Latch for door closure
  • Blower Motor for forced air circulation
  • Control panel with Data-logger, PC connectivity and electrical components
  • Standby refrigeration by Compressor-1 and Compressor-2
  • Standby humidity by Heater-1 and Heater-2
  • Emergency bell switch to open the door from inside
  • Highly ergonomic handle with unique multi lever key lock
  • SS Racks and Trays

Preformance Characteristics:
  • Tailor made sizes as per available space.
  • Microprocessor controlled refrigeration system & heaters provide temperature accuracy and reproducible results.
  • Temperature range 20 °C to 60 °C, Accuracy ± 1???C.
  • Humidity range 40 % to 95 % RH,Accuracy ± 2% RH.
  • User friendly LCD screen
  • Easy-to-read large display.
  • Integrated Data logger for large data storage.
  • Variety of options for the graphic display of process parameters & utilities.
  • Real time clock for proper data management.
  • Electronically controlled humidification system with capacitance type humidity sensors.
  • Suitable for stability studies according to ICH guidelines.
  • Sealed Toughened glass view window on door felicitates sample viewing.
  • Temperature, Humidity and utility failures visual and audible alarms.
  • Remi "DATASOFT" data monitoring software as per FDA guideline of 21 CFR Part 11.
  • Stainless steel racks and trays.
  • IQ OQ PQ DQ documentation.
Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
V. Ramakrishnan (Marketing Manager)
Remi Elektrotechnik Limited
Building B, Survey No. 65/1, Village-Valiv,, Andheri East
Vasai Virar - 401208, Palghar, Maharashtra, India
Call Us: 
Call Response Rate: 79%
Share Us :



Home  |   Profile   |  What We Offer  |  Site Map  |   Contact Us

© Remi Elektrotechnik Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Remi Elektrotechnik Limited