PLUS Range of Lab Equipments

The REMI Cold Cabinets are designed for bio sample storage applications in pharmaceutical, microbiology, biotechnology, chemical & research labs.

These cabinets are available in standard & GMP versions.

Performance:

• Temperature range 2°C to 12°C
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Hermetically sealed Compressor with CFC free refrigerant
• Microprocessor controller with LED display
• Sensor failure alarm

User Friendly:

• Digital LED display of Temperature with set, process value & audio visual alarm
• Chamber calibration port on side
• Adjustable trays
• Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
• Also available 4” LCD version with additional features

Safety:

• Alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• ecured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

Additional Features for LCD version:-

• 4 Inch attractive LCD display
• Intelligent Controller helps maintain temperature in case of sensor failure
• Battery Backup for Temperature Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration of set parameters
• Self-Diagnosis for errors
• Histogram format of 24 hours temperature recording
• Power failure and resumption recorded with date and time
• Settable High / low alarm points with date and time
  Memory for storage of upto 1000 records
• Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Alarm on equipment / security gate
• PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines

These newly developed compact bench top Cooling Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint.

 

Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile.

Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.

 

Performance:

• Stable speed output
• High Capacity (CM-8 Plus)
• High Speed (CM-12 Plus)
• Wide variety of rotors & reduction adaptors
• Precise temperature control up to – 20°C
• Pre-cooling feature
• Fast spin feature
• Calibration window on lid for speed (rpm)

Leading Technology:

• Brushless Induction motor with frequency drive ensures gentle start
• Microprocessor based unit with alpha numeric LCD display
• Self-diagnosis of errors
• Parameters setting through easy to use bi-directional encoder
• Inverter fault detection with auto shutdown
• CFC free refrigeration system

User Friendly:

• 24 programme memory
• 3 Accelerations, 4 Deceleration profiles
• Choice of rpm / rcf setting & display
• Operating panel with feather touch keys
• Digital countdown timer 0-99 minutes & continuous run
• Last set parameters recall (Useful for repetitive analysis)
• Automatic door opening
• Log of cumulative centrifuge run time

Safety:

• Automatic Rotor identification
• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Motor overload protection
• Gas hinge to prevent falling of door
• Emergency lid lock release

The REMI Cooling Incubators are designed for applications in pharmaceutical, microbiology, biotechnology, chemical & research labs. These chambers are used for culture of bacteria, microorganism, tissue culture, incubation, immunological work & storage of vaccines etc.

These incubators are available in standard & GMP versions.

Performance:

• Temperature range 5°C to 60°C
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency Hermetically sealed Compressor with CFC free refrigerant
• Microprocessor controller with LED display
• Sensor failure alarm

User Friendly:

• Digital LED display of Temperature with set, process value & audio visual alarm
• Chamber calibration port on side
• Adjustable trays
• Chamber illumination by UV and / or Fluorescent tubes (Optional)
• 24 hours Cyclic timer for regulating illumination conditions (Optional)
• Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
• Also available 4” LCD version with additional features

Safety:

• High temperature safety cut off & alarms for high / low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

Additional Features for LCD version:-

• 4 Inch attractive LCD display
• Intelligent Controller helps maintain temperature in case of sensor failure
• Battery Backup for Temperature Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration of set parameters
• Self-Diagnosis for errors
• Histogram format of 24 hours temperature recording
• Power failure and resumption recorded with date and time
• Settable High / low alarm points with date and time
• Memory for storage of up to 1000 records
  Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Alarm on equipment / security gate
• PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines

Designed for mixing liquids in Schools, Laboratories & Factories
Touch/ Continuous Operation mode Selection through bi-directional Switch
Speed Regulation through knob provided on the control panel
Interchangeable mixing heads for use with variety of tubes

REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions

Performance:

• Porcelain Enamel Hot Plate model for temperatures up to 340°C
• Ceramic Hot Plate model temperatures up to 550°C
• Easy-to-read backlit LCD for display of set & actual parameters
• Monitoring of set & actual temperature / speed

Leading Technology:

• Advanced Stirrers with microprocessor technology
• Constant speed even with change of load / Voltage
• Maintenance free brushless motor
• Porcelain Enamel / Ceramic Top Plates
• Scratch proof & excellent chemical resistance

User Friendly:

• External temperature probe (PT-1000) for control of fluid temperature
• Last parameter recall, ideal for repetitive processes
• Models 5ML Plus & 5MLH Plus have feature of different modes:-
• A mode for running without external temperature sensor
• B Mode for control of temperature through external sensor

Safety:

• Settable safe temperature limit to avoid overheating
• Residual Temperature warning when unit is switched off for operator safety
• Protection class acc. to DIN EN60529

Technical Specifications:

The REMI Deep Freezers are designed for storage of biological samples in biotech, life science, clinical research as well as medical & pharmaceutical specimens, serums, vaccines, blood components. These freezers are available with temperatures up to -20°C and – 40°C.

These freezers are available in standard & GMP versions.

Performance:

• Temperature up to -20°C / -40°C (AC room)
• Upright models with small foot prints
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guideline.

Loading Technology:

• Machine filled PUF insulation to eliminate void pockets
• Hermetically sealed Compressor with CFC free refrigerant
• Unique design of thermal barrier for better energy efficiency
• Microprocessor controller with LED display
• Sensor failure alarm.

User Friendly:

• Digital LED display of Temperature with set, process value & audio visual alarm
• Adjustable trays
• Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
• Also available 4” LCD version with additional features.

Safety:

• Alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor.

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software.

Additional Features for LCD version:-

• 4 Inch attractive LCD display
• Intelligent Controller helps maintain temperature in case of sensor failure
• Battery Backup for Temperature Controller - 12 V, Secured audit trail report 7.2 Ah sealed maintenance free, Fully charged Alarm report with mention of alarm condition battery runs for more than eight hours
• Automatic Calibration
• Self-Diagnosis for errors
• Histogram format of 24 hours temperature recording
• Power failure and resumption recorded with date and time
• Settable High / low alarm points with date and time
• Memory for storage of upto 1000 records
• Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Alarm on equipment /security gate
• PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines

The REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity.

Seed Germinators are used for germination & biological studies, which includes UV, Fluorescent lights coupled with 24 hours cyclic timer for lights on/off regulation.

These chambers are available in standard & GMP versions.

Performance:

• Temperature range 10°C to 60°C, Humidity range 40% to 95% Rh
• Precise monitoring of temperature and humidity conditions
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Heating by long life SS tubular heaters
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
• 4 Inch attractive LCD display for direct display of humidity & temperature
• Battery Backup for Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration of set parameters
• Self-Diagnosis for errors
• Power failure and resumption recorded with date and time
• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Hermetically sealed Compressor with CFC free refrigerant

User Friendly:

• Histogram format of 24 hours temperature & humidity recording
• Settable High / low alarm points with date and time
• Memory for storage of up to 1000 records
• Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Chamber calibration port on side
• Adjustable trays
• PC communication with RS-485 and software compiling to 21 CFR part 11 as per USFDA guidelines (Optional)
• Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)

Safety:

• Low water level alarm and power cutoff of boiler tank heater
• High temperature safety cut off & alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

Laboratory Centrifuges model R-8C BL & R-8M are suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, these units are truly versatile.

Micro Centrifuges models RM-12C BL & R-12M are ideal for growing routine application in biochemical and clinical labs, for Hematocrit, Corpuscle Percentage contents in blood, Serum analysis and precipitate separation etc.

Performance:

• Stable speed output even under unstable voltage conditions
  Low sample temperature rise
• High Capacity (R-8C BL / R-8M)
• High Speed (RM-12C BL / R-12M)
• Wide variety of rotors & reduction adaptors

Leading Technology:

• Brushless Induction motor with frequency drive
• Microprocessor controller with digital display
• Smooth & soft start
• Inverter fault detection with auto shutdown

User Friendly:

• 7 segment LED display of speed Digital countdown timer & continuous run
• Dynamic brake for quick deceleration
• Last set parameters recall (Useful for repetitive analysis)
• Automatic door opening
• Stainless Steel centrifuge Chamber, easy to clean

Safety:

• Safety lid interlock to prevent lid opening during centrifugation
• Imbalance detection & centrifugation stop with display of error
• Motor overload protection
• Gas hinge to prevent door falling
• Emergency lid lock release

Models R-8M & R-12M are advanced versions having following additional features:

• Feather touch setting keys
• Alphanumeric LCD display of speed & RCF
• Selection of 3 acceleration & deceleration profiles

REMI presents the next generation of laboratory stirrers for stirring / mixing etc. of chemical, pharmaceutical, food and cosmetic products. The equipment basically consists of body, chuck, stainless steel blade propeller and a U-type stand.

Performance:

• 2 models – 40 liters & 20 liters capacity
• Speed range 50 – 2200 rpm
• High torque even at low speeds
• Monitoring of set & actual speed
• Constant speed even with change of load / Voltage

Leading Technology:

• Advanced Stirrers with microprocessor technology
• Constant speed even with change of load / Voltage
• Maintenance free Brushless DC motor ensures high torque
• Accurate stirring speed control

User Friendly:

• Easy-to-read backlit LCD for display of set & actual parameters
• Display of torque / speed
• Last parameter recall, ideal for repetitive processes
• Accepts shafts up to 13mm Ø

Safety:

• Motor protection in case of continuous overload
• Stopper for protection of vessel & shaft
• Special base design for topple free operation
• Protection class acc. to DIN/EN 60529

Technical Data:

REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions

Performance:

• Speeds range 100 - 1500 rpm
• Porcelain Enamel Hot Plate model for temperatures up to 340°C
• Ceramic Hot Plate model temperatures up to 550°C
• Easy-to-read backlit LCD for display of set & actual parameters
• Monitoring of set & actual temperature / speed
• High accuracy of temperature control with embedded dual sensors

Leading Technology:

• Advanced Stirrers with microprocessor technology
• Constant speed even with change of load / Voltage
• Maintenance free brushless motor
• Porcelain Enamel / Ceramic Top Plates
• Scratch proof & excellent chemical resistance

User Friendly:

• External temperature probe (PT-1000) for control of fluid temperature
• Last parameter recall, ideal for repetitive processes
• Models 5ML Plus & 5MLH Plus have feature of different modes:-
• A mode for running without external temperature sensor
• B Mode for control of temperature through external sensor
• C Mode for recall of last set Parameters

Safety:

• Unique safety temperature control system
• Settable safe temperature limit to avoid overheating
• Residual Temperature warning when unit is switched off for operator safety
• Protection class acc. to DIN EN60529

The REMI Orbital Shaking Incubators are designed for precise temperature control and simultaneous shaking applications required in fermentation studies, enzyme reactions, life science, tissue culture and biotechnology research labs.

These chambers are available in standard & GMP versions.

Performance:

• Brushless Induction Motor with variable frequency drive suitable for continuous operation
• Step less variable frequency drive ensures gentle shaking start and maintains set speed
• Maximum shaking capacity - 9 flasks x 2000 ml
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Heating by long life SS tubular heaters
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Counter balanced mechanism for high stability in uneven load of different sized flasks
• Microprocessor controller with 4” LCD display for display of shaking speed & temperature
• Battery Backup for Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration for temperature
• Self-Diagnosis for errors
• Power failure and resumption recorded with date and time
• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Hermetically sealed Compressor with CFC free refrigerant

User Friendly:

• Universal Shaking Platform to accommodate different sized assorted flasks
•  Additional tray to store samples
•  9 Programs memory
•  Histogram format of 24 hours temperature recording
•  Settable High / low alarm points with date and time for temperature
•  Memory for storage of up to 1000 records
•  Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
• Chamber calibration port on side
• PC communication with RS-485 and software compiling to 21 CFR part 11 as per USFDA guidelines (Optional)
• Chamber illumination by UV and / or Fluorescent tubes (Optional)
• 24 hours Cyclic timer for regulating illumination conditions (Optional)
• Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)

Safety:

• High temperature safety cut off & alarms for high/low set temperature
• Electrical circuit breaker
• Time delay for compressor switch on (CIS-24 Plus)
• Overload cut off relay for compressor (CIS-24 Plus)

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

The REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity.

Seed Germinators are used for germination & biological studies, which includes UV, Fluorescent lights coupled with 24 hours cyclic timer for lights on/off regulation.

These chambers are available in standard & GMP versions.

Performance:

• Temperature range 10°C to 60°C, Humidity range 40% to 95% Rh
• Precise monitoring of temperature and humidity conditions
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
• Heating by long life SS tubular heaters
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
• 4 Inch attractive LCD display for direct display of humidity & temperature
• Battery Backup for Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration of set parameters
• Self-Diagnosis for errors
• Power failure and resumption recorded with date and time
• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Hermetically sealed Compressor with CFC free refrigerant

User Friendly:

• Histogram format of 24 hours temperature & humidity recording
• Settable High / low alarm points with date and time
• Memory for storage of up to 1000 records
• Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Chamber calibration port on side
• Adjustable trays
• PC communication with RS-485 and software compiling to 21 CFR part 11 as per USFDA guidelines (Optional)
• Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)

Safety:

• Low water level alarm and power cutoff of boiler tank heater
• High temperature safety cut off & alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

The REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements

These freezers are available in standard & GMP versions.

Performance:

• Designed as per ICH guidelines to meet, WHO and USFDA requirement
• Fulfills storage conditions of 25???C – 60% Rh, 40???C – 75% Rh, 30???C – 65% Rh, 25???C – 40% Rh
• Precise monitoring of temperature and humidity conditions
• Comply with GMP requirements
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit
• Heating by long life SS tubular heaters
• Validation protocol with IQ, OQ, DQ Documentation as per ICH guidelines

Leading Technology:

• Microprocessor controller with LCD display & capacitance type sensor for precise control of temperature and humidity
  4 Inch attractive LCD display for direct display of humidity & temperature
• Battery Backup for Controller - 12 V, 7.2 Ah sealed maintenance free, Fully charged battery runs for more than eight hours
• Automatic Calibration of set parameters
• Self-Diagnosis for errors
• Power failure and resumption recorded with date and time
• Machine filled PUF insulation to eliminate void pockets
• Unique design of thermal barrier for better energy efficiency
• Hermetically sealed Compressor with CFC free refrigerant

User Friendly:

• Histogram format of 24 hours temperature and humidity recording
• Settable High / low alarm points with date and time
• Memory for storage of up to 1000 records
• Centronic interface to record Temperature, Humidity, Date, & Time by attaching Dot Matrix printer with adjustable print interval
• Chamber calibration port on side
• Adjustable trays
• PC communication with RS-485 and software complying to 21 CFR part 11 as per USFDA guidelines (Optional)
• Data logger for 8 Point (4 + 4) temperature / humidity recording with sensor, printer interface and software (Optional)

Safety:

• Low water level alarm and power cutoff of boiler tank heater
• High temperature safety cut off & alarms for high/low set parameters
• Electrical circuit breaker
• Time delay for compressor switch on
• Overload cut off relay for compressor

Features of Software complying to 21 CFR part 11:

• Multiple level alpha numerical password with password ageing
• Electronic signature and menu entered comment
• Secured audit trail report
• Alarm report with mention of alarm condition
• Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
• Reports in graphical and tabular form
• Data Stored in PC server with Lan connectivity and can be monitored on any PC with password authentication
• Multi chamber data acquisition on single software

Designed for mixing liquids in Schools, Laboratories & Factories Touch/ Continuous Operation mode Selection through bi-directional Switch Speed Regulation through knob provided on the control panel Interchangeable mixing heads for use with variety of tubes.

REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions.


Performance :

• Speeds range 100 - 1500 rpm
• Porcelain Enamel Hot Plate model for temperatures up to 340°C
• Ceramic Hot Plate model temperatures up to 550°C
• Easy-to-read backlit LCD for display of set & actual parameters
• Monitoring of set & actual temperature / speed
• High accuracy of temperature control with embedded dual sensors

Leading Technology :

• Advanced Stirrers with microprocessor technology
• Constant speed even with change of load / Voltage
• Maintenance free brushless motor
• Porcelain Enamel / Ceramic Top Plates
• Scratch proof & excellent chemical resistance

User Friendly :

• External temperature probe (PT-1000) for control of fluid temperature
• Last parameter recall, ideal for repetitive processes
• Models 5ML Plus & 5MLH Plus have feature of different modes:-
• A mode for running without external temperature sensor
• B Mode for control of temperature through external sensor
• C Mode for recall of last set Parameters

 
Safety :

• Unique safety temperature control system
• Settable safe temperature limit to avoid overheating
• Residual Temperature warning when unit is switched off for operator safety
• Protection class acc. to DIN EN60529

Technical Data :

These newly developed compact bench top Cooling Centrifuges models CM-8 Plus and CM-12 Plus offers quiet operation with very small footprint.

Centrifuge model CM-8 Plus is suitable for routine sample analysis in Medical, Hospital, Pathology and Institutional laboratories. With a wide choice of rotor heads and adaptors, this unit is truly versatile.

 

Micro Centrifuge model CM-12 Plus is useful for routine applications in bio-technology, PCR, life sciences, bio-chemical and clinical labs etc. This unit is ideal for centrifugation with micro tubes from 0.2 ml upto 1.5 ml.

These Plus series Refrigerated Centrifuges are designed for centrifugation of temperature sensitive material and find application in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical & Clinical research laboratories.

All the centrifuges have rust proof, easy to clean Stainless Steel centrifuge inner chamber with steel guard. A wide variety of swing out and angle rotors with a choice of reduction adaptors make these units truly versatile.

Users can select models as per their requirements from high volume low speed Centrifuges (C-23 Plus, CPR-23 Plus), low volume high speed centrifuges (C-24 Plus, CPR-24 Plus) in table top design & compact high-speed high volume (C-30 Plus, CPR-30 Plus) floor standing centrifuges.

 

Reduction Adaptors for Swing Out Head Model R-230 M + R-231 M